Cynthia's Ark Vintage Sewing Machine Quilt
Materials 1 Thimble Pleasures Sewing Machine Panel 15 cm Tape Measure fabric 15 cm scissors fabric 65 cm Thimble fabric 80 cm black fabric 50cm cream fabric
Cutting Cut your sewing machine panel into 2
equal strips. Cut a 5 ½’ strip from each of the tape
measure, scissor and thimble fabrics and cut 5 x 5 ½’ from each strip for a
total of 15 squares. Cut 10 x 1 ½’ strips from the black fabric and
cross cut 30 x 5 ½’ strips and 30 x 7 ½’ strips. Cut 3 x 1 ¾’ strips from the cream and cross
cut 12 x 7 ½’ strips for the blocks and cut another 8 x 1 ¾’ strips for sashing
strips. Cut 5 x 4’ strips from the thimble fabric. Cut 5 x 2 ½’ strips from the black fabric for
your binding.
Piecing To
make the blocks sew a 5 ½’ black strip to both side of your 15 x 5 ½’ squares.
Press seam to the square.
Sew a 7 ½’ black strip to the top and bottom of your
block. Press to the black strip this
time.
Make 15 blocks.
Arrange the blocks into 3 rows of 5. Refer to quilt
picture if you want to the same arrangement as I did but you can arrange them how
you like them. Sew a cream 7 1/2 ‘strip in between the blocks as per picture
below. Repeat with your other 2 rows.
Measure your pieced strips and cut 6 x 1 ¾’ cream strips
to that measurement and sew one to the top and one to the bottom of your row of
blocks. Press to the cream strip.
Trim your 2 machine panel’s strip to the same
measurement of your block rows. Arrange
your rows as per pictures and sew the 5 rows together. Press towards the sewing
machine panel.
Sew your remaining 3 x 1 ¾’ cream strip together in to
a long strip for your side borders. Press seams open. Measure your quilt through the middle top to
bottom and cut 2 cream strips to that length and sew them to the sides of your
quilt.
Next
is the border and sew 3 x 4’ border strips together lengthwise. Press seams open. Now cut 2 strips the same length as you cut
for your cream side sashing strips. Sew
your border strips to the sides of your quilt. Press to the border. Sew the remaining part
strip to your last 2 border strips. Press seams open. Measure your quilt
through the middle sideway this time and cut 2 strips to that measurement. Sew
them to the top and bottom of the quilt. Press toward the border. This
completes your top.
Quilting Layer your backing fabric out (wrong side up) then
the batting goes on top followed by the quilt top (right side up). Make sure
you smooth out any lumps and baste with safety pins or use your preferred method.
Quilt as you wish. I just stitched in the ditch for this one. There a lots of options for you.
Backing
For
the backing I have used a piece of Thimble Pleasures Sewing Sayings 155cm cut
it off centre so I have 2 pieces x 155 cm and cut 2 x 12’ strips of scissor
fabric joined them lengthwise and sewing the 3 pieces together with the scissor
material in the middle. (Not included in the materials list)
Binding To
make the binding join the strips
end to end with a 45 degree mitred seam, press the seams open. Press the
binding strip in half lengthwise with the wrong sides facing. Stitch the
binding the front of the quilt, mitring the corners as you go and mitre the
binding ends together to complete and sew in place. Trim the backing and
batting to ½’ from your binding stitching line. Fold the binding over the edge
to the back of the quilt and slip stitch it in place with a matching coloured
thread. Don’t forget to finish your quilt with a label on the back.
Finished size: 49 1/2' x 58’
(126 x 148 cm)
This quilt was designed by Cynthia Woodham for
Cynthia’s Ark. This pattern is for personal use only, not to be copied in any
form without the permission from the designer. Copyright © Cynthia’s Ark 2016
All
the fabrics used in the pattern are available at www.cynthiasark.com.au and there is a
kit available (Kit includes all the fabric for the quilt top and binding only) to purchase while stocks last. You will need to purchase backing fabrics separately.
Printer friendly version (PDF)
Until Next Time
Keep Stitching
Cynthia
No comments:
Post a Comment